Question 1

What solvent does the 20.LE CO2 Extractor use?

Accepted Answer

It uses CO₂ as the process solvent, recovering cannabinoids without leaving a hydrocarbon or ethanol solvent behind in the extraction step. The fraction taken can be tuned by pressure and temperature.

Question 2

What room classification do I need for the 20.LE CO2 Extractor?

Accepted Answer

CO₂ is not a flammable solvent, so CO₂ extraction is typically not subject to the hydrocarbon extraction-room classification requirement. Final classification and ventilation requirements are determined by your local authority having jurisdiction during the facility code review.

Question 3

Can I run the 20.LE CO2 Extractor in an EU GMP facility?

Accepted Answer

GMP — including EU GMP — is a facility and process standard: it applies to the building, the procedures, the documentation and the people together, and no extraction system carries a GMP certification on its own. Whether a system helps or hinders an EU GMP programme comes down to its material selection, hygienic design and the qualification documentation available for it. Contact Decimal Engineering to discuss configuration options for your facility.

Question 4

What documentation comes with the 20.LE CO2 Extractor?

Accepted Answer

A current specification sheet for the 20.LE CO2 Extractor is available from Decimal Engineering on request, and customers receive access to a standard operating procedure (SOP) library for their equipment. Documentation packages to support IQ/OQ/PQ and facility turnover are available; scope varies by model and configuration.

Extraction Vessel Volume	20 L
Biomass per Run	6 – 9 lb biomass per run
Runtime / Cycle Time	3 – 5 h (varies depending on biomass quality)
Optimum Pressure	1,800 PSI
Pumping	Dual-phase pumping (liquid and gas)
Controls	Touch-screen graphic controls and remote tablet support
Working Area / Footprint	1,000 sq ft (depending on configuration)
Power	230 v, 480 v, 3-phase, 60 Hz
Dimensions	65" L x 33" W x 86" H (1,100 lb)
Origin	Made in USA

20.LE CO2 Extractor

Specifications