- Home
- Parts Store
- Across International C80-10 -75°C 10L Recirculating Chiller

Heating & Cooling Components
Across International C80-10 -75°C 10L Recirculating Chiller
$19,791.00
$19,990.00
Ships in 2–4 weeks
Freight
Quantity
1
Ships LTL freightFreight is quoted/confirmed after order.
SKU: HC-AI-C80-10
Across International C80-10 -75°C 10L Recirculating Chiller
The Across International C80-10 is a low-temperature recirculating chiller with a 10 L stainless steel reservoir and two KK compressors. It supplies temperature-control fluid for a recommended 20 L jacketed reactor with a 6 L jacket. This 220V, 60Hz, single-phase configuration uses a centrifugal circulation pump and Pt100 feedback with PID control.
Working temperature range: -60°C to -75°C. This unit is not designed to run hotter than -60°C.
The -75°C figure is an empty-load ultimate temperature with no jacketed reactor attached; it is not a guaranteed temperature under a process load.
- Manufacturer: Across International
- Model: C80-10
- Working temperature range: -60°C to -75°C; not designed for operation above -60°C
- Ultimate temperature: -75°C, empty load with no jacketed reactor attached
- Electrical configuration: 220V / 60Hz / 1-Phase; 22 A; 4,750 W
- Compressors: Two KK compressors
- Refrigerants: R404A (2,680 g) and R23 (710 g)
- Published cooling capacity at 25°C ambient: 2,000 W at -40°C; 1,500 W at -50°C; 1,000 W at -60°C; 280 W at -75°C; 180 W at -78°C
- Cooling-capacity reference note: The published reference points outside -60°C to -75°C do not extend the permitted working temperature range
- Reservoir: 10 L (2.6 gal), 304 stainless steel
- Fluid connections: 1/2 in. NPT
- Drain: 3/8 in. hose barb
- Circulation pump: Centrifugal; 30 L/min (8 gal/min); 280 W; 1 bar
- Temperature control: PID; ±2°C; Pt100 sensor
- Unit dimensions (D × W × H): 38.5 × 25 × 52 in.
- Shipping dimensions (D × W × H): 44 × 30 × 64 in.
- Unit weight: 515 lb
- Shipping weight: 615 lb
- Shipping method: Freight shipment required
- Certifications: ETL / UL / CSA
- Recommended application: 20 L jacketed reactor with a 6 L jacket volume
- Lead time: 2 to 4 weeks.
Weight: 615 lbs